28
Assembly Bingo
This type of woodworking joint is cut and spliced at an angle
Miter
This type of screw setting allows for an angled head screw
Countersunk
Locked bottom, Burred Bottom, & Pittsburgh are examples of ______
Seams
The most common permanent fastener used on engineering materials
Rivets
This low strength polymer glue is often called contact cement
Elastomer
Fasteners can be broken down into permanent, semipermanent &
Temporary
Screws, bolts, nails, and staples are examples of ____ fasteners.
Semipermanent
When _____ welding, the material is placed between two electrodes
Spot
Type of bonding uses the base metal itself to create the weld
Fusion
In ___ welding, a spark jumps from the electrode through the part
Arc
The action of putting things together is called _____.
Assembly
Permanently fastening parts together using heat, pressure,or glue
Bonding
Impulse welding used on plastic films is an example of __ Welding
Resistance
Pressure or ____ bonding used on ductile materials like copper
Cold
This type of bonding uses chemicals to soften the plastic
Solvent
When parts are temporarily fastened to allow drying of adhesives
Clamping
Type of joint shapes the material into the shape of a trapezoid
Dovetail
Setting of a screw that has a flat or oval head requires a _____.
Counterbore
Type of joint where two boards are brought together side by side
Lap
Seaming in which shaft is put in enlarged hole-is heated & cooled
Shrink Fit
These are gaged by the penny, which gives both diameter & length
Nails
The most common methods for flow bonding are brazing & _____.
Soldering
The smaller diameter hole used when installing screws is the ___.
Pilot
Three types of permanent bonds include rivets, ring nails, & ____
Sewing
Threaded fasteners used to assemble metal parts
Machine Screws
The burning gases in ______ welding get up to 6300 degrees F.
Oxyacetylene
Spot welder rely on a(n) ___ to alter and increase the voltage
Transformer
Brazing is done with copper, silver, and _____ alloys.
Aluminum