25 Finishing Processes Bingo This process is used in automotive trim, jewelry, & tinplate. Electroplating Process used for coating sheet stock like steel & hardboard panel Rolling During ______, the paint is dried in an oven on the assembly line Electrocoating Coatings used as primers for organic and chrome plating Phosphate Material containing liquid that forms coating of polymerization Paint When a layer of zinc is added to steel, it is said to be _____. Galvanized Type of cleaning that uses abrasives, wire brushes, or metal shot Mechanical Glasslike coating usually cured by firing above 1500 degrees F. Ceramic The 3 types of converted finishes are Anodizing, Phosphating, &: Oxidizing Common converted finish that uses current & an acidic electrolyte Anodizing A surface treatment that protects or decorates a material Finishing The ___ layer in the anodizing process is colored with dye. Oxide Material containing a polymer coating & a solvent that evaporates Lacquer Type of paint that is clear and oil based Varnish Finishing material that misses the product Overspray Applying finish involves 2 basic methods : Conversion & _____ Surface Type of coating that provides a decorative/paint-adhering surface Chromate Type of spraying that vaporizes metal or ceramic materials Plasma Type of spraying that uses static electricity to avoid overspray Electrostatic Type of dip coating in which the material is flooded with finish Curtain Type of finish sometimes referred to as beetle juice Shellac Shellac is used as an ingredient in the coating of ___ in the UK. Skittles Type of cleaning that uses liquids & vapors to remove dirt/grease Chemical Type of surface coating that requires skill & a lot of time. Brushing Automatic spraying is normally done with the aid of _____. Robots